PACSystems™ Industrial Displays User Manual
Section 3
GFK-3138B
Jul 2021
Hardware
79
7.
Once power is applied, the unit begins initializing. The first thing to display is the splash screen.
Be sure to connect a DC power cord to this 3-pin power connector. Using a voltage out of the range may
fail to boot the system or cause damage to the system board.
Graphics Interface
The display port consists of the following:
DP++ Port
The DP++ is a digital display interface used to connect a display device such as a computer monitor. It is
used to transmit audio and video simultaneously. The interface, which is developed by VESA, delivers
higher performance features than any other digital interface.
BIOS Setting
Configure the display de
vice in the Chipset menu (“DISPLAY control” s
ubmenu) of the BIOS. Refer to
chapter 3 for more information.
RJ45 LAN Ports
Features
2 Intel® I210IT PCI Express Gigabit Ethernet controllers (4 on larger box module)
The LAN ports allow the system board to connect to a local area network through a network hub or
router.
BIOS Setting
Configure the onboard LAN in the Advanced menu (“Wakeup Configuration” submenu) of the BIOS.
Refer to chapter 3 for more information.
USB Ports
The USB ports allow for data exchange between your computer and a wide range of simultaneously
accessible external Plug and Play peripherals. The RXi
–
Panel PC is equipped with 2 onboard USB 3.0
ports (USB 0-1) in the small configuration with an additional 2 USB 2.0 ports (USB 4-5) in the large box
configuration.
BIOS Setting
Configu
re the onboard USB in the Advanced menu (“Wakeup Configuration” submenu) of the BIOS.
Refer to chapter 3 for more information.
