PACSys
tems™ Industrial Displays User Manual
Section 1
GFK-3138B
Jul 2021
Introduction
25
NCT 6112D Super IO Features
This section is used to configure some control functions of the system super IO chip.
Figure 28: NCT 6112D Super IO Features
BIOS Parameter
Description
WatchDog Count Mode
A WatchDog timer (WDT) is a hardware timer that automatically
generates a system reset if the main program neglects to periodically
service it. It is often used to automatically reset an embedded device
that hangs because of a software or hardware fault. Use this menu to
select the WatchDog Timer Unit: second or minute.
WatchDog TimeoutValue
Enter the value to set the Super IO WatchDog timer. 0 means disabled.
