PACSystems™ Industrial Displays User Manual
Section 3
GFK-3138B
Jul 2021
Hardware
84
Socket Description
Connecting Input Power (24V DC-in)
To connect to power, follow these steps:
1.
Verify that the power cable is not energized.
2.
Loosen the screw clamps on the mating power connector.
3.
Strip the insulation from the power cables.
4.
Secure the power cable to the mating connector, noting
polarity, and tighten the screw clamps. The torque for the
attaching screws is 0.3 Nm (2.26 in-lb).
5.
Apply dc power to the unit. During normal startup and operation, the LED status indicator displays
as follows:
•
Solid amber while the RXi - Industrial Display unit is starting up
•
Solid green during normal operation
6.
Once power is applied, the unit begins initializing. The first thing to display is the splash screen.
Be sure to connect a DC power cord to this 3-pin power connector. Using a voltage out of the range
may fail to boot the system or cause damage to the system board.
Before connecting the Web Panel to other devices, please read this manual carefully first to prevent
damage to the Motherboard.
Power Socket (DC_IN1)
DC_IN1: (Conn. Header Socket, 3.5mm, 1 x 3PIN), used to provide 24V voltage for the system.
DC_IN1 Pin#
Signal
Pin1
FG
Pin2
DC_IN-
Pin3
DC_IN+
Figure 70: Power Socket (DN-IN1)
