Emerson Micro-Motion 2400S, Configuration And Use Manual, Page: 176 / 198

168 Micro Motion
®
Model 2400S Transmitters with Analog Outputs
Menu Flowcharts – Model 2400S AN Transmitters
Figure C-8 Communicator detailed setup menu
continued
On-Line Menu >
5 Detailed Setup
4 3
Config outputs
1 Channel setup
2 HART output
3 Modbus setup
4 Fault timeout
5 Comm fault indicator
1 Channel setup (read only)
2 Channel A setup
3 Channel B setup
4 AO setup
5 FO setup
6 DI/DO setup
1
6
Additional options
1 Frequency output
2 Discrete output
3 Discrete input
3
1 Channel A (read-only)
2 Channel B (read-only)
3 PV is
4 Range values
(1)
5 PV AO cutoff
6 PV AO added damp
7 AO1 fault setup
1 Channel B (read-only)
2 TV is
3 FO scale method
(1)
4 TV freq factor
(1)(2)
5 TV rate factor
(1)(2)
4 TV pulses/unit
(1)(3)
4 TV units/pulse
(1)(4)
4/5 Max pulse width
(5)
5/6 FO polarity
(5)
6/7 FO fault indicator
(6)
7/8 FO fault value
(5)
2 DO 1 is
3 DO 1 fault indication
4 DO 1 polarity
5 Flow switch setpoint
6 Flow switch variable
7 DI 1 polarity
5
1 Modbus address
2 Modbus mode
3 Read Modbus data value
4 Write Modbus data value
1 Poll addr
2 Num preambles
3 Burst mode
4 Burst option
5 Burst var 1
6 Burst var 2
7 Burst var 3
8 Burst var 4
2
3
Device information
1 Tag
2 Descriptor
3 Message
4 Date
5 Dev id
6 Final assembly number
7 Sensor s/n
8 Sensor model
9 Output option board
· Construction materials
· Revision #s
1 External
2 Internal
1 Milliamp output
2
4
1 External
2 Internal
(1) Can also be configured from Basic Setup menu.
(2) Displayed only if FO Scale Method is set to Freq = Flow.
(3) Displayed only if FO Scale Method is set to Pulses/Unit.
(4) Displayed only if FO Scale Method is set to Units/Pulse.
(5) Menu number varies depending on FO Scale Method
configuration.