Emerson Fisher FIELDVUE DVC6000 HW2, Instruction Manual

Page: 88 / 120

*Recommended spare
2. Available in the Small Hardware Spare Parts Kit
5. Available in Alignment Pin Kit
14. Available in Feedback Unit Kit
15. Available in Feedback Unit Termination Strip Kit
Instruction Manual
D103785X012
Parts
June 2017
88
Key Description Part Number
Pressure Gauges, Pipe Plugs, or
Tire Valve Assemblies
(see figure 7‐3)
47* Pressure Gauge, nickel-plated brass case, brass connection
Double-acting (3 req'd); Single-acting (2 req'd)
PSI/MPA Gauge Scale
To 60 PSI, 0.4 MPa
18B7713X042
To 160 PSI, 1.1 MPa 18B7713X022
PSI/bar Gauge Scale
To 60 PSI, 4 bar
18B7713X032
To 160 PSI, 11 bar 18B7713X012
PSI/KG/CM
2
Gauge Scale
To 60 PSI, 4 KG/CM
2
18B7713X072
To 160 PSI, 11 KG/CM
2
18B7713X082
66 Pipe Plug, hex hd
For double-acting and single acting direct w/gauges
(none req'd)
For single-acting reverse w/gauges (1 req'd)
For all units w/o gauges (3 req'd)
67 Tire Valve Assembly (3 req'd)
Not for mounting on 1250 and 1250R actuators.
Remote Feedback Units
Common Parts
DVC6015, DVC6025, and DVC6035
(see figures 7‐4, 7‐5, and 7‐6)
23 Cap Screw, hex socket
(14,15)
(2 req'd)
44 Wire Retainer, pl stl
(14,15)
(9 req'd)
46 Alignment Pin
(5,14)
for DVC6015 and DVC6035
49 Screw, self tapping (2 req'd)
58 Set Screw, hex socket
(14)
62 Pipe Plug, hex hd, SST
(14)
64 Anti-seize compound (not furnished with the instrument)
65 Lubricant, silicone sealant (not furnished with the instrument)
72 Cap Screw, hex socket
(2,14)
(2 req'd)
for DVC6015, and DVC6025
78 Bias Spring, SST
(2,14)
for DVC6015 and DVC6035
79 Feedback Arm
for DVC6015 and DVC6035
80 Cap Screw, hex socket, SST
(2,14)
81 Square Nut, SST
(2,14)
104 Cap Screw, hex hd
(14)
(4 req'd), DVC6015 only
Not for mounting on 1250 and 1250R actuators.
Mounting parts for 1250 and 1250R actuators are
included in the mounting kit for these actuators.
Key Description Part Number
107 Mounting Bracket
(14)
, DVC6015 only
Not for mounting on 1250 and 1250R actuators.
Mounting parts for 1250 and 1250R actuators are
included in the mounting kit for these actuators.
- - - Feedback Linkage Shield
Up to 50.4 mm (2 inch) travel
All sliding-stem actuators except 585C size 60
50.4 mm (2 inch) to 104mm (4 inch) travel
All sliding-stem actuators except 585C size 60
585C size 60, 19 mm (0.75 inch) to
104 mm (4 inch) travel
131 Retainer Wire
163 Plain Washer, SST
(2,14)
223* Potentiometer/Bushing Assembly (Travel Sensor Assembly)
(14)
DVC6015 and DVC6025
DVC6035
251 Feedback housing
(14)
252 Assembly Plate Shield
(14)
(DVC6015 only)
253 Terminal bracket
(14,15)
254 Terminal Strip
(14,15)
255 Terminal Cap
(14)
256 O-ring, fluorosilicone
(14)
257 Machine Screw, pan head
(14)
(2 req'd) (DVC6015 only)
258 Label, cover
(14)
260 Hex Nut, SST (2 req'd)
261 Nameplate
265 Plug
(14)
(DVC6015 and DVC6035 only)
DVC6025 (see figure 7‐5)
74 Mounting Bracket
82 Bias Spring, SST
83 Bearing Flange, PTFE-based (2 req'd)
84 Feedback Arm Assembly, SST
85 E-ring, pl stl (2 req'd)
86 Plain Washer, pl stl (2 req'd)
87 Follower Post, SST
88 Roller, SST/PTFE
89 Spring Lock Washer, pl stl
90 Hex Nut, pl stl
91 Arm Assembly, SST
92 Cap Screw, hex socket (4 req'd)
93 Torsion Spring, Feedback Arm
HART Filters
HF340, DIN rail mount 39B5411X022
HF341, DIN rail Mount, pass through (no filter) 39B5412X012