3410 Series Gas Ultrasonic Meters Operations Manual
Section 5: Calibrate and configure the meter
3-9000-777 Rev E
January 2018
Triggered Delta Volumes
51
Gas Chromatograph setup
(
Section 5.11
)
Configure a serial port as a Modbus master for polling a GC. Selections include:
•
Serial port
•
GC protocol
•
GC baud rate
•
GC comms address
•
GC stream number
•
GC heating value units
•
GC heating value type
•
Gas composition to use on alarm
AGA8 calculations
(
Section 5.12
)
Configure the properties necessary for the AGA8 calculations. Selections
include:
•
Gross Method 1
•
Gross Method 2
•
Detail
•
Externally
Continuous flow analysis
(
Section 5.13
)
Configure the Continuous Flow Analysis features. Selections include:
•
Flow limits
•
SOS comparison
•
Liquid detection
•
Abnormal profile
•
Blockage
•
Internal bore buildup
Local Display
(
Section 5.14
)
Configure the local display settings. Selections include:
•
Display units
•
Display Items
•
Scroll Delay
Table 5-5 Configure operational parameters
Calibration selection
Description
