3410 Series Gas Ultrasonic Meters Operations Manual
Section 5: Calibrate and configure the meter
3-9000-777 Rev E
January 2018
Dry calibration
41
The meter provides separate dry calibration coefficients for each flow direction as listed in the
table below.
Table 5-1 Data Points for dry calibration
Daniel MeterLink
Display Name
Data Points, Options and Guidelines
Forward A0
Data points affected:
•
FwdA0
Options:
•
Enter a value (m/s or ft/s) within the range [-1,1 m/s].
Guidelines:
•
This value should only be modified under direction of Daniel personnel.
Forward A1
Data points affected:
•
FwdA1
Options:
•
Enter a value (dimensionless) within the range [0.95,1.05].
Guidelines:
•
This value should only be modified under direction of Daniel personnel.
Forward A2
Data points affected:
•
FwdA2
Options:
•
Enter a value (s/m or s/ft) within the range [-0.1,0.1 s/m].
Guidelines:
•
This value should only be modified under direction of Daniel personnel.
Forward A3
Data points affected:
•
FwdA3
Options:
•
Enter a value (s
2
/m
2
or s
2
/ft
2
) within the range [-0.1,0.1 s
2
/m
2
].
Guidelines:
•
This value should only be modified under direction of Daniel personnel.
Reverse A0
Data points affected:
•
RevA0
Options:
•
Enter a value (m/s or ft/s) within the range [-1,1 m/s].
Guidelines:
•
This value should only be modified under direction of Daniel personnel.
Reverse A1
Data points affected:
•
RevA1
Options:
•
Enter a value (dimensionless) within the range [0.95,1.05].
Guidelines:
•
This value should only be modified under direction of Daniel personnel.
