User Instructions
MAN-02-04-60-0352-EN Rev. 3
February 2019
88
Section 17: Technical Data and Certifications
Technical Data and Certifications
TYPE
FL-05
FL-15
FL-25
FL-40
Max Electric Thrust
lbs.(kN)
1124(5)
3372(15)
5620(25)
10116(45)
Max Modulating Thrust
lbs.(kN)
674(3)
1798(8)
2697(12)
3372(15)
End of Spring Linear Fail-Safe Thrust
lbs.(kN)
1124(5)
1798(8)
2697(12)
6744(30)
Fail-Safe Spring Return Direction
Linear shaft extending retracting
Fail-Safe Trigger
Loss of 24 V DC fail-safe command signal or main power supply (selectable)
Adjustable Operating Time(Electric)
mm/sec
0.21 - 5.8 mm/s
0.15 - 4.5 mm/s
Fail-Safe Spring Rate / Field Adjustable
sec
1 - 3
1 - 5
2 - 10
3 - 10
Max Linear Travel
inch (mm)
1.18(30)
2.0(50.8)
4.0(101.6)
4.0(101.6)
Operation Mode
On/Off Duty
S2
Modulating Duty
S9
Manual Override
Optional
VALVE-MOUNTING
Mounting Base
ISO 5210/ DIN 3358
F07/F10
F10/F12
F10/F14
F14
Stem
M 16x1.5
M 16x1.5
M 16x1.5
M 20x1.5
OPERATING CONDITIONS
Ingress Protection
IP66 (NEMA 4x), IP67 (NEMA 6), IP68
Ambient Temperature
- 40° C (-40°F) to +60°C (140°F)
HOUSING
Material
Aluminum, NEMA 4X, 6
Enclosure
Weather-proof / Explosion-proof (optional)
Certifications
1ph, 24VD – CSA NEC 500 / NEC505, ATEX, IECEx, LVD 3ph
- ATEX
1ph, 24VD – CSA
NEC 505, ATEX
Coating
High quality two component polyurethane paint system-C3 ISO12944-5
Approximate Weight
lbs. (kg)
85 (39)
105 (48)
187 (85)
352 (160)
MOTOR - BRUSHLESS TECHNOLOGY
Isolation Class
Insulation class F, max 155° C (311°F) permanent temperature
Power Supply
V
24 - 230 VDC, 1x 115 - 230 VAC, 50 - 60Hz, 3x 380 - 480 VAC, 50 - 60 Hz
24 VDC (option not available with FL-40)
Current Consumption
A
2.5
Power Consumption idle with fail-safe brake energized
W
36
40
40
40
ACTUATOR CONTROL
Technology
Integrated processor control unit with frequency technology for variable speed control
Control Unit
Control Elements
· With additional language independent symbols
· Selector switch LOCAL - OFF- REMOTE (lockable)
· Control switch OPEN - STOP - CLOSE contact less sensor technology
Control Function
· Full stroke test
· Partial stroke test
Local Display
Backlit LCD display, can be rotated in 90 degree steps
LEDs
4 programmable red, green, blue LEDs for operation - readiness - warning - and error messages
Communication
Infrared communication interface and Bluetooth technology including Android App
for simple configuration
Control
Inputs
· 5 configurable binary (discrete inputs) control inputs:
OPEN - STOP - CLOSE - EMERGENCY OPEN - EMERGENCY CLOSE
· Nominal voltage 24VDC
Status Indication
Outputs
· 8 configurable binary (relay) outputs:
READY - OPEN - CLOSE - RUNNING OPEN - RUNNING CLOSE - TORQUE - LOCAL - REMOTE
· Power supply 24 VDC +/– 6V (selectable internal or external)
Voltage Input and Output
Power Supply - External
· Input power range: 20-30VDC max current consumption 320mA or 100mA in current save mode
· Status indication also in case of a main power supply failure
Power Supply - By Actuator
· Output voltage: typical 22V max output current 150mA
· Reference ground is the common ground of the control unit and of the analog inputs and outputs
Functions
Standard
· Switch-off mode adjustable, travel or torque dependent
· Torque adjustable: 25-100% of max torque
· Adjustable speed for process optimization and emergency speeds
· Password protection (reading and/or writing)
· Multilingual display
· Status indication for binary inputs/outputs and analog signals on LCD display
· Data logging for analysis and service
· Motor protection by positive temperature coefficient sensors
Electrical Connection
Cable Entry
3 metric threaded boreholes for cable grands: Weather-proof 1xM40, 1xM32, 1xM25 /
Explosion-proof 1xM40 + 2xM20
OPTIONS
Digital Communication
Modbus RTU, ProfiBus, ProfiNet, Foundation FieldBus HART Platforms
Relay Board
250 VAC, 2A with 4 outputs
Analog Position Transmitter
0/4-20mA (2-wire)
Coating
4 layer with Epoxy under coat for increased corrosion protection – C5-I, C5-M ISO12944-5
