User Instructions
MAN-02-04-60-0352-EN Rev. 3
February 2019
25
Section 6: Commissioning
Commissioning
CAUTION: CHECK MAXIMUM PARAMETERIZED TORQUE
Please note that, during motor operation, only torque monitoring remains active, as travel
ad justment will happen subsequently. Therefore, please check beforehand whether the
maximum torque has been already parameterised.
Step 6 - Absolute and relative values on the display will change continuously along with
position changes.
Figure 23
Position Change Selector Setting
Figure 24
Position Change Display
Step 7 - Manually move the actuator with the handwheel (see Section 2.1, or 2.6) or by
motor via the control switch (black button) to the end position OPEN of the valve.
•
Absolute value: Absolute value of the position feedback
•
Relative value: the value to the other end postion
