User Instructions
MAN-02-04-60-0352-EN Rev. 3
February 2019
9
Section 3: General Information
General Information
CAUTION: OBSERVE COMMISSIONING INSTRUCTIONS
Commissioning instructions (see Section 5) must be strictly observed. During assembly
of the supplied valves at the factory, end postions are set and documented by attaching a
label (see Figure 8). During commissioning at the plant, these settings must be verified.
3.10
Information Notice (Tag)
Each actuator is provided with a bilingual tag containing key information, which is attached
to the handwheel after final inspection. This tag also shows the internal commission
registration number (see Figure 8).
Figure 8
Tag
