User Instructions
MAN-02-04-60-0352-EN Rev. 3
February 2019
67
Section 9: Status Area
Status Area
Display Overview:
1.
Input Number
2.
Signal (0=LOW: 1=HIGH)
9.1.3 Status - Analog Values
Display of analog values: Input 1 (In1) is used by the positioner as the setpoint; Input 2 (In2)
serves as an external value for the optional PID controller. In the analogue output (out),
only the control signal is shown, regardless of whether the output current actually flows or
not (interruption of the current loop).
Figure 63
Analog Values Display
Display Overview:
1.
Input 1
2.
Input 2
3.
Ouput
4.
All values in mA
9.1.4 Status - Absolute Values
This status displays the absolut position of the actuator.
Figure 64
Absolute Value Display
Display Overview:
1.
Absolute value of the position unitSerial Number of the Actuator
2.
Relative value of the position unit 3 and
3.
Absolute and relative value for the torque unit (calibrated in factory)
