Technical data
[91]
•
No ambient temperature change of EZ 1000 during 1 hour before measurement,
power and sensor connected to EZ 1000 for at least 10 minutes before
measurement and calibration.
•
WayCon reference target material is 42CrMo4 (AISI 4140), unless otherwise stated.
Note
For measurements that require a higher measuring accuracy, factory calibrated measuring chains are
available.
Accuracy of measuring chains different from the standard measuring chain
Add the measurement inaccuracies in
to the values in
to get the
accuracy of measuring chains different from the standard measuring chain.
Table 11-2: Additional inaccuracies – DSL
Parameter
Additional
Measurement
Inaccuracy (DSL),
Test range
Additional
Measurement
Inaccuracy (DSL),
Operating range
Remarks
Cable length 1 m + 3 m
Manual calibration
8.25
%
8.25
%
Automatic calibration
0.75
%
0.75
%
Multipoint calibration
0.0
%
0.75
%
Cable length 1 m + 7 m
Manual calibration
2.75
%
2.75
%
Automatic calibration
0.75
%
0.75
%
Multipoint calibration
0.0
%
0.75
%
Other cable lengths
Manual calibration
0.75
%
0.75
%
Automatic calibration
0.75
%
0.75
%
Multipoint calibration
0.0
%
0.75
%
Other target materials
2.25
%
2.25
%
Material selected from
Machine Studio material
table
Extended measuring
range: 1.5 mm
(Extended range factor:
1.5)
Manual calibration
1.75
%
2.0
%
Automatic calibration
1.75
%
2.0
%
Multipoint calibration
0.25
%
0.5
%
Summary of Contents for AMS EZ1000
Page 39: ... 35 6 7 Control drawings ...
Page 40: ... 36 ...
