Emagic Logic fun, User Manual

Page: 142 / 256

138
Chapter 9
Working with Audio in the Arrange Window
Emagic
Logic fun
Important: Remember that the tracks that contain regions
should be assigned as audio tracks. More information can be
found in the section entitled “Arming Tracks” Chapter 8, p. 163
ff.
Dividing Regions
The Scissors tool used to divide MIDI sequences can also be
used for regions. When a region is cut, two new regions will be
generated. The new regions will then be numbered consecu-
tively.
Important: When you click on a region with the Scissors tool,
you can precisely position the Scissors while click-holding the
mouse button. If a finer resolution is needed, click-hold the
region with the Scissors tool and press
ç
(Mac) or
A
(PC). To
obtain maximum resolution (ticks), hold down
S
while hold-
ing down the modifier key. The cut will be made when you
release the mouse button.
Deleting Regions
Regions can be deleted the same way as MIDI sequences.
Select the region, and press the
B
key, or click on the region
with the Eraser tool.
Deleting a Recording
If a region from a new recording is deleted, (any recording
made since the song was opened for the current session), Logic
fun will ask if the corresponding audio file should also be
deleted. By allowing you to completely delete unwanted takes,
space on the hard drive is saved.
If you delete regions from files recorded in previous sessions,
then this question will not be asked. This prevents any valu-
able recorded material from being accidentally deleted. If you
want to delete any of these older files from the drive, first
remove the regions from Logic fun Song, and go through the
computer’s operating system to delete the files.