Ribbon
Preparation
Step
4
Wind one or two turns of ribbon onto the rib-
bon core.
Ribbon Loading
Ribbon loading involves the placement of the
prepared ribbon onto the Supply and Take-up
spindles. Similar procedures apply to Print Sta-
tions and Laminators, as follows:
Ribbon Loading
Step
1
Lift open the cover.
Ribbon Loading
Step
2
Press down on the Print/Lamination Head Re-
lease Latch to raise the Print Head. The Print
Head springs upward when released.
980179-001 Rev. A
21
Operation
Figure 2-5
Raising the Cover
Figure 2-6
Raising the Print
Head
Press Here
to Raise
Print Head
Press Here
to Raise
Print Head
