ELSA LANCOM Business LC-4X00, Manual

Page: 270 / 276

ELSA LANCOM Business internal
ELSA LANCOM Business
R100
0107 FS_development up
023f FS_development up
0511 FS_development up change
030c 08000912345678CGNP-development filtered
An SAP response was received (sent by the IPX node 00a057123456) by the local
network. With this response the servers 'FS_development' (file server),
'FS_development' (NetWare 386 server), 'FS_development' (DNS server) and
'FS_development' (time sync server) are recorded as available again in the SAP
table. In this case the status of the time sync server 'FS_development' has changed
in the SAP table (i.e. the server was previously not available). The last displayed
server is a print server; because this server type is set with a SAP filter, it is not
recorded in the SAP table but is rejected.
LAN trigger
Because of a received SAP response a status change in the SAP table has occurred,
which is immediately reported in the local network by the SAP process; the change
can therefore only have occurred because of the WAN's evaluation of a SAP
response.
LAN age
The SAP process of the router ”ages“ all server/services forwarded from the local
network minute by minute. After a period that can be adjusted a SAP entry is
deleted (Setup/IPX-module/SAP-configuration/Aging-minutes)
Online trace 'IPX watchdogs'
The outputs under 'IPX-Wd.' describe the processing of so-called 'IPX watchdog' packets.
These are packets that are sent at regular intervals from a Novell server to a workstation
to verify the connection to this workstation. The trace outputs are displayed in the
following format:
쮿
Format: [Source interface] [Receive/Transmit] [Source address] [Target address]
[Action]
쮿
Example:
LAN RX
DstAddr: 12345678 00a057654321 0451
SrcAddr: 00000002 00a057123456 0451
Spoof
The ELSA LANCOM has received an IPX watchdog from the node 00a057123456,
which was intended for checking a remote workstation. Because the remote
network with the workstation is active, the IPX watchdog is answered locally by
ELSA LANCOM to avoid establishing a connection unnecessarily. Alternatively the
following displays for actions will appear: