ELSA LANCOM Business LC-4X00, Manual

Page: 202 / 276

Description of the menu options
ELSA LANCOM Business
R32
Below is a detailed description of the meaning of each field:
The total charges incurred are not displayed directly. However, the charges are totaled
internally in order to permit the management of the charges budget (also see
Setup/
Charges-module ).
Status/Info-connection
The menu item Status/Info-connection has additional information on the current
connection status (logical remote station etc.) for every available interface. The table
maintained here has the following layout:
Below is a detailed description of the meaning of each field:
Ifc Designates the associated channel.
Connection Indicates the number of connections to the particular channel.
Active Indicates the number of connections actively established for the channel.
Passive Indicates the number of connections established for the channel by incoming
calls.
Errors Indicates the number of connection errors.
Con.-Time Indicates the period of time the current connection has existed. If no connection
exists, “No-connection” is output.
Charge Indicates the amount of charges for the current connection. This value is reset to
zero when a new connection is established.
Ifc Status Mode Dialup-
remote Device-name B1-DT B2-DT
Ch01
Ch02 Ready
Ready 0
0 0
0
Ifc Designates the associated channel.
Status Indicates the status of the particular connection.
The possible values are:
Init , Setup WAN , Ready , Dial , Incoming call , Protocol ,
Connection , Callback , Bundle and Reserved . The Bundle status is indicated in
the display ELSA LANCOM Business 4100 by the addition of a “/2“ in columns 15 and
16 of the associated display line. Bundle is displayed for the second interface either
when a bundle connection has been activated via the first interface or when a leased-
line connection with two B channels has been set.
Reserved is displayed for the
second interface when a connection exists to the first B channel and the Y connection
has been deactivated.
Mode Reflects the type of establishment. The following are possible:
Active (active call establishment = dialing)
Passive (passive call establishment = call acceptance)
CB (call establishment via callback)