ELSA LANCOM Business LC-4X00, Manual

Page: 126 / 276

Workshop
ELSA LANCOM Business
116
The following table shows the assignment of device names, addresses and telephone
numbers as used in the example:
IP routing made simple with ELSA LANconfig and the wizards
For the configuration on LAN to LAN coupling, there is a wizard in ELSA LANconfig which
makes all required settings in the software for you and takes the peculiarities of TCP/IP
networks into account. Once you have started up the wizard (automatically or by clicking
Tools
왘
Setup Wizard ) select the entry 'Connect two local area networks'. The wizard
will now prompt you for the required data (including the network protocol in use) and will
then instruct you on what settings still need to be made on the workstation computers.
As you would like to interconnect several networks in this example, run the wizard once
on the router in the headquarters for each of the networks you would like to connect. The
wizard is also used once for each of the branch office routers.
Step by Step: What settings are made in the routers?
In principle, the settings are the same for all routers. In the following configuration steps,
beginning with the router in the central office, we show exactly what is set the same and
provide information on the deviations in the other devices.
햲
For the names that are used in the name list to be also forwarded and detected by
the routers, name the device appropriately (configuration area 'Management',
'General' tab):
Network Example Inc. Glasgow London Manchester Leeds Birmingham Bristol
IP-address-LAN 10.1.10.0 10.1.11.0 10.1.12.0 10.1.13.0 10.1.14.0 10.1.15.0 10.1.16.0
IP addresses for
the routers 10.1.10.101 10.1.11.100 10.1.12.100 10.1.13.100 10.1.14.100 10.1.15.100 10.1.16.100
IP netmask 255.255.255.0
Device-name Example_Inc. Glasgow London Manchester Leeds Birmingham Bristol
Call numbers 4711100
4711200
4711300
4711400 1234561 1234562 1234563 1234564 1234565 1234566