ELSA LANCOM Business LC-4X00, Manual

Page: 205 / 276

Description of the menu options
ELSA LANCOM Business
R35
Status/S
0
-bus
This option allows you to display the current status of the S
0
interface. The statistics
have the following layout:
D-info This table shows general information related to the D channel:
D2-statistics This table shows layer 2 information for the individual B channels:
Status/Channel-statistics
This table shows information on the current status of the two B channels. The
information from this table is primarily used for output via
ELSA LANmonitor. Therefore,
some values are shown simply as bits with no further explanation.
The table has the following layout:
/S
0
-bus Running status displays
D-info Overview of the D channel status
D2-statistics Breakdown of the Layer-2 information of the D channel for the
B channels.
Channel B-channel identification.
Protocol D-channel protocol. Either the protocol fixed in the interface table or the protocol
detected in the 'Auto' settings at the ISDN terminal.
Layer-2 Activation of layer 2 of the D channel ('Yes' or 'No')
TEI TEI assigned ('Yes' or 'No')
S
0
-activation Displays activation status ('Yes' or 'No')
Channel B-channel identification.
TEI T erminal E quipment I dentifier assigned by the switching center.
L2-activation Activation of layer 2 of the D channel ('Yes' or 'No').
Connections Number of connections made over the displayed TEI.
Channel State App Mode Cause Dialup-
remote Sub-
address Charge Conn.-
time Extra ISDN-
display
S
0
-1-ERR 00000000 Router active 0000 0241123456 00000000 3 0
S
0
-1-B1 00000000 a/b active 0000 0241123457 00000000 2 20
S
0
-1-B2 00000000 LAN-
CAPI passive 0000 0241123458 00000000 4 180