ELSA LANCOM Business LC-4X00, Manual

Page: 245 / 276

Description of the menu options
ELSA LANCOM Business
R75
LAN-config This option allows you to define whether remote configuration from the LAN side is
possible (
On ), is not possible ( Off ), or is possible only in read mode ( Read ). The default
setting for this option is On .
WAN-config This option allows you to define whether remote configuration from the WAN side is
possible (
On ), is not possible ( Off ), or is possible only in read mode ( Read ). The default
setting for this option is Off .
Password-
required This specifies whether a new password should be requested every time a remote
configuration is begun (
On ), or the password request should be suppressed ( Off ). The
default setting for this option is On .
Farconfig-(EAZ-
MSN) This subscriber number permits remote configuration via PPP. If no number is specified
here, remote-configuration calls will be accepted on all numbers.
Maximum
connections This option allows you to display the maximum number of remote configuration sessions
that can occur simultaneously for the device.
Config-aging-
minute(s) If data transmission halts during a remote configuration session, e.g. because the user is
no longer entering data, the device automatically releases the connection at the end of
the time period specified here. Possible settings are from 1 to 99 minutes; the default
setting is 5 minutes.
Login-errors This entry specifies the number of failed attempts allowed before the log-in block is
activated. An empty password (simply pressing <ENTER> at the password prompt) is not
considered an attempt and therefore does not activate the block.
The default value is 5. A lower value may cause the log-in block to be activated with only
one access on an older ELSA LANconfig! In this case obtain an updated ELSA LANconfig
version over our online media.
Lock-minutes This entry has two meanings. It indicates how long the access is blocked if the log-in
block has been activated. It also sets the period after which the device forgets all prior
login errors.
Language This option allows you to select whether you will use the German or English version of
the software for performing the configuration.
Config-aging-minute(s) Time limit for remote configuration connections
Login-errors Number for failed log-in attempts before the log-in block is
activated
Lock-minutes Duration of block and period until old log-in errors are for-
gotten
Display contrast
Language Configuration language
/Config-module Configuration module settings