ELSA LANCOM Business LC-4X00, Manual

Page: 53 / 276

Operating modes and functions
ELSA LANCOM Business
43
Round-robin list
The round-robin list in the
ELSA LANconfig can be found in the 'Communication'
configuration section on the 'Remote Sites' tab, or under
/Setup/WAN-module/
RoundRobin-list
during telnet or terminal sessions.
If a remote station can be reached using several numbers, enter the first number in the
name list and the rest in the round-robin list.
쮿
Remote site
Name of the remote station as specified before in the name list.
쮿
Round-robin
Additional numbers for this remote station. Multiple numbers are separated by
hyphens.
쮿
Begin with:
Indicate whether a new call establishment should start with the last successfully
used number, or always with the first number of the list.
Channel list
The channel list in the ELSA LANconfig can be found in the 'Communication'
configuration section on the 'Remote Sites' tab, or under
/Setup/WAN-module/
Channel-list
during telnet or terminal sessions.
Use the channel list to determine the minimum and maximum number of B channels to
be used for the connection, which channels are to be connected in which sequence, and
the number of channels to be used as a dial-up backup for a fixed connection if required.
쮿
Remote site
Name of the remote station as specified before in the name list.
쮿
Min
Minimum number of channels to be used to establish a connection.
If more than one channel is specified, static channel bundling will be used for this
connection. The layer to be used must be set up for bundling in the Layer-2 options.
쮿
Max
Maximum number of channels to be used to establish a connection.
If a larger maximum number of channels is stated than the minimum, dynamic
channel bundling will be used for this connection. The layer to be used must be set
up for bundling in the Layer-2 options.
쮿
Order
The sequence in which connections for the individual channels are established;