ELSA LANCOM Business LC-4X00, Manual

Page: 208 / 276

Description of the menu options
ELSA LANCOM Business
R38
Name Here you can enter the device name (maximum 16 characters). The set of characters
available includes uppercase and lowercase letters as well as some special characters.
You can display the full range of available characters during a configuration session by
entering the following command:
set \setup\name ?
In the default configuration, no name is entered.
The device name is required for identification purposes; it is a prerequisite for any
connection via the IPX or IP router module, since the routers can exchange data only with
known remote stations, and is also required for the unambiguous identification of a
remote bridge station.
In the case of PPP connections, either the user name with the password from the PPP list
or the device name is transferred to the remote station as a device ID during a verification
by PAP or CHAP.
In addition, the device names you assign must be unique. For example, you might match
the device names to the location (e.g. Glasgow, London, Provider, etc.).
Setup/WAN-module
This menu groups together all the settings necessary for starting up the WAN interface
and controlling connections to logical remote stations.
DHCP-module DHCP server settings
NetBIOS-module Settings for the NetBIOS proxy
Config-module Configuration module settings
LANCAPI-module ELSA LANCAPI settings
LCR-module Least-cost router settings
DNS module DNS server settings
Time-module Time module settings
/Setup System configuration
/WAN-module WAN settings
Interface-list S
0
interface settings
Router-interface-list Router module settings
Channel-list Settings for the use of the available channels
Name-list Remote station settings
RoundRobin-list Settings for different remote station numbers
Layer-list Settings for the layer combinations used