ELSA LANCOM Business LC-4X00, Manual

Page: 127 / 276

Workshop
ELSA LANCOM Business
117
Enter the names of the devices directly in the 'Setup' menu with configurations with
other aids:
set /Setup/Name Example_Inc.
The devices in the branches correspondingly acquire the names 'Glasgow' to
'Bristol'.
햳
Then enter the specific call numbers of the router in the central office
(configuration area 'Communication', 'General' tab):
cd /Setup/WAN-module/Router-interface-list
set s0-1 4711100 On No
The other interfaces and devices correspondingly receive their own call numbers.
햴
New entries in the name list (configuration area 'Communication', 'Remote Sites'
tab) with identification of the remote stations and the call numbers with selection
of a layer available on all routers (here for example the preset DEFAULT layer)
enable the router in the central office to call the routers in the other networks. With
the standard values for the B1 and B2 hold times, the router automatically
disconnects every connection if there is no data flow on this line for 20 seconds.
Every network should bear its own telephone costs, therefore the call-back entry
remains set to OFF:
cd /Setup/WAN-module/Name-list