Elnec BeeHive304, User Manual

Page: 41 / 152

BeeProg3
41
blank check, read, verify
program
erase
configuration and security bit program
checksum
interpret the Jam Standard Test and Programming Language (STAPL), JEDEC standard
JESD-71
interpret the VME files compressed binary variation of SVF files
interpret the SVF files (Serial Vector Format)
interpret the Actel STAPL Player files
security
insertion test
contact check
ID byte check
special
production mode (automatic start immediately after device insertion)
multi-project mode
lot of serialization modes (more type of incremental modes, from-file mode, custom
generator mode)
statistic
count-down mode
Buffer operations
view/edit, find/replace
fill/copy, move, byte swap, word/dword split
checksum (byte, word)
print
File load/save
automatic file type identification
Supported file formats
unformatted (raw) binary
HEX: Intel, Intel EXT, Motorola S-record, MOS, Exormax, Tektronix, ASCII-SPACE-HEX,,
ASCII HEX
Altera POF, JEDEC (ver. 3.0.A), e.g. from ABEL, CUPL, PALASM, TANGO PLD, OrCAD
PLD, PLD Designer ISDATA, etc.
JAM (JEDEC STAPL Format), JBC (Jam STAPL Byte Code), STAPL (STAPL File) JEDEC
standard JESD-71
VME (ispVME file VME2.0/VME3.0)
SVF (Serial Vector Format revision E)
STP (Actel STAPL file)
GENERAL
operating voltage 100-240V AC rated, 90-264 VAC max., 47-63Hz
power consumption max. 25W active