Elnec BeeHive304, User Manual, Page: 116 / 152

Elnec s. r. o.
116
one of the status LEDs (OK or Error) lights, in dependence on the result of previous operation
and the LED Busy is blinking. If the program detects removal of a device from ZIF socket,
then the status LED goes off, but the LED Busy is still blinking to indicate readiness of the
program to repeat last operation with new device. After the program indicates one or more
pins of (new) device in the ZIF socket, the LED Busy goes light continually. From this point
the program waits a requested time for insertion of the rest pins of new device. If a requested
time (Device insertion complete time) overflows and a device is not correctly inserted, the
program will light the LED Error to indicate this state. When new device is inserted correctly,
the status LED goes off and a new operation with device is started.
Save options
Page allows you to select the program options saving when exiting program. Three options
are available here:
Don't save don't save options during quitting program and don't ask for saving options
Auto save save options during quitting program without asking for saving options
Prompt for save program asks user for saving options before quitting program. User can
select to save or not to save options
Other
Page Other allows user to manage other program settings.
Panel Application priority allows user to set the priority of the program. Priority settings can
affect performance of programmer (device programming time), especially if there are running
more demanding applications in the system. Please note that setting application priority level
to Low can significantly slow down the program.
In the panel Tool buttons , hint display options on toolbar buttons in main program window
can be modified. In the panel Start-up directory can be selected mode of selecting directory
when program starts. Default start-up directory means directory, from which program is
called. Directory in which program was lastly ended means the last current directory when
program was lastly ended. This directory assumes the first directory from directory history list.
Options / View
Use the View menu commands to display or hide different elements of program environment
such as toolbars.
Following toolbars are available now:
Options / View / Main toolbar
Choose this command to show or hide the Main toolbar.
Options / View / Additional toolbar
Choose this command to show or hide the Additional toolbar.
Options / View / Device options before device operation
Choose this command to enable/disable display of Device options before device operation is
confirmed.