Elnec BeeHive304, User Manual

Page: 102 / 152

Elnec s. r. o.
102
Jam Player version 2 (see Action and Procedures controls)
Action
Select desired action for executing.
Jam file of version 2 consists of actions. Action consists of calling of procedures which are
executed.
Jam file of version 1 does not know statements 'action' and 'procedure', therefore choice
Action is not accessible. Program flow starts to run instructions according to boolean
variables with prefix DO_something. If you need some new boolean variables with prefix
DO_something then contact us.
Procedures
Program flow executes statements from each procedure. Procedures may be optional and
recommended. Recommended procedures are marked implicitly. You can enable or disable
procedures according to your needs. Jam Player executes only marked procedures. Other
procedures are ignored. Number of procedures is different, it depends on Jam file.
Variables
Jam file of version 1 does not know statements 'action' and 'procedure'. Program flow starts
to run instructions according to boolean variables with prefix DO_something. Jam Player
executes all marked DO_something cases in algorithm. Number of variables (procedures) is
constant, it does not depend on Jam file. If you need some new boolean variables with prefix
DO_something then contact us.
OK
Accept selected action with appropriate procedures which are marked.
Information
It displays information about Jam file. You can preview Notes and source file in dialog.
Device according to Jam file
File is made for a specific device. Device name is found in Jam file in part NOTE identifier
DEVICE. Device name must be identical with name of the device selected in dialog Select