ELNA XPRESSIVE 2, User Manual

Page: 206 / 230

204
These three segments are to be sewn in a row. Notice the
positioning of all the beads.
Angle Line beads
Angle Lines have 3 parts: the dot bead, the dash bead, and the line
joining the beads. An Angle Line bead is a black bead with either a
dot or a minus sign in it. When you place Angle Line beads, the first
one is and the second one is .
These beads determine the angle of the stitches in the segment. You
must place all Angle Line beads in the same direction. Therefore, if
you started by placing the Angle Line beads from left to right, you
need to continue placing them in this way throughout the segment.
You can add additional angle lines using the Angle Lines tool
in the Edit toolbar. Or, you can delete existing Angle Lines by
right-clicking the Angle Line bead and selecting Delete.
Exit point of the
previous segment Start and Stop beads
of the selected
segment Entry point of the next
segment