ELNA XPRESSIVE II
93
User’s Guide
To select an underlay type:
1
Select the segment.
2
Click the Segment Settings
tool on
the ribbon.
You see the Segment Settings property
pages.
3
Click the Underlay property page.
4
In the Type area, select the underlay type
you want: Contour or Perpendicular.
5
Adjust any of the other settings. Refer to
the related procedures for more
information.
6
Click OK.
Changing the inset
distance
You can change the inset distance. Xpressive
calculates the inset distance (the distance the
underlay stitches are placed from the edge of
the top stitching.) Inset distance changes the
amount of underlay coverage. The smaller
the inset distance, the more coverage you
have.
To change the inset distance:
1
Select the segment.
2
Click the Segment Settings
tool on
the ribbon.
You see the Segment Settings property
pages.
3
Click the Underlay property page.
4
In the Type area, select the underlay type:
Contour or Perpendicular.
5
In the Inset Distance box, enter the
amount of distance you want.
Enter a zero value if you want to place the
underlay directly on the edge of the
segment. The default is 0.6 mm.
6
Click OK.
Increasing the number of
lines for perpendicular
underlay
When you select perpendicular underlay, you
can set the inset distance and increase the
number of perpendicular lines.
To increase the number of lines:
1
Select the segment.
2
Click the Segment Settings
tool on
the ribbon.
You see the Segment Settings property
pages.
3
Click the Underlay property page.
4
In the Type area, select Perpendicular.
5
In the Number of Lines box, enter the
number of perpendicular lines you want.
6
Click OK.
Inset
distance 0.60
mm
Inset
distance
0.120 mm
Inset
distance
0.180
You can combine underlay types to get
maximum coverage.
Summary of Contents for XPRESSIVE 2
