ELNA eXtend 864air, Manual

Page: 34 / 64

32
v
Pull the thread down and along the slit and draw it to
the left through the thread path.
y
Slit
u
Thread path
b
Pull the thread up and along the left side of the thread
take-up lever cover and pass it over the take-up lever
thread guide.
i
Thread take-up lever cover
o
Thread take-up lever thread guide
v b
n
⁄0
m ,
.
v
b
n
m
i
o
u
u
y
i
!0
!1
!2
!3
o
n
Pass the thread through the left slit of the needle
thread guide.
!0
Needle thread guide
m
Pass the thread through the needle bar thread guide
from left to right.
!1
Needle bar thread guide
,
Thread the left needle from front to back.
!2
Left needle
* Use the needle threader (refer to page 30).
.
Pull out approximately 4˝ (10 cm) of thread from the
needle and slide it under the foot so that it runs in
between the foot and the upper knife.
Refer to pages 28 and 29 for details on how to thread
the right needle.
⁄0
Close the looper cover and lower the presser foot
lifter.
Povucite konac nadole duž zareza, a zatim levo
u usmerivač.
Zarez
Usmerivač konca
Povucite konac nagore i levom stranom poklopca
podizača, a zatim preko vodilice podizača konca.
Poklopac podizača
Vodilica podizača konca
Provucite konac kroz levi otvor na vodilici konca
igle.
Vodilica konca igle
Provucite konac ispod prečke nosača igle sleva
udesno.
Prečka nosača igle
Provucite konac kroz otvor na igli spreda ka pozadi.
Leva igla
Za upotrebu uvlakača konca pogledajte strnu 30.
Izvucite približno 10 cm konca iz igle i podvucite
ispod stopice, tako da prolazi između stopice i
gornjeg noža.
Gornji nož
13-
Zatvorite poklopac petljača i spustite polugu za
podizanje stopice.