ELNA eXtend 864air, Manual

Page: 36 / 64

34
TEST STITCHING
Starting Sewing
z
Close the side cover and the looper cover.
Turn the power switch ON.
x
Make sure that the upper knife is activated (in the
raised position).
c
Lower the presser foot lifter.
v
Draw all of the threads back under the foot. Slowly
run the machine and produce a 2˝ (5 cm) thread chain
while gently pulling the thread chain to the back.
Check the chain.
b
Insert the fabric under the toe of the foot. (You do
not need to raise the foot.) Start sewing slowly. The
fabric will automatically be fed. Guide the fabric in the
desired direction.
* For heavyweight fabric, raise the presser foot and
insert the fabric in front of the knife. Lower the foot
and start to sew while guiding the fabric.
Finishing Sewing
z
After stitching is complete, continue to slowly produce
approximately 5˝ (12 cm) of thread chain while gently
pulling the thread chain to the back.
q
z
x
x
Cut the threads with the thread cutter as illustrated,
leaving a thread chain approximately 2˝ (5 cm) long
on the end of the fabric.
q
Thread cutter
PROBNO ŠIVENJE
Početak šivenja
Zatvorite bočni poklopac i poklopac petljača.
Uključite glavni prekidač, na položaj ON.
Uverite se da je gornji nož aktivan ( u podignutom
položaju).
Spustite polugu nosača stopice.
Podvucite sve konce ispod stopice i ka pozadi. Polako
pokrenite mašinu i napravite lančić dužine 5 cm, lagano
ga povlačeći ka pozadi.
Proverite kako je formiran lančić.
Postavite tkaninu pod stopicu. (Ne morate je podizati).
Započnite šivenje polako. Tkanina će se automatski
kretati ispod stopice. Vodite tkaninu u željenom pravcu.
Kada šijete teške tkanine, podignite stopicu i tkaninu postavite
ispred noža. Spustite stopicu i započnite da šijete vodeći
tkaninu.
Završavanje šava
Nakon što ste završili prošivanje, nastavite da šijete da
napravite lančić dužine 12 cm na kraju tkanine.
Odsecite konce pomoću bočnog nožića, kao što je
prikazano na ilustraciji, ostavljajući probližno 5 cm
lančića.
Bočni nožić za odsecanje konca