Gold Twitter Installation Guide
MAN-G-TWI (Ver. 2.000)
|Feedback Connector FDB|
www.elmomc.com
53
Table of Contents
10.3.2.
Port B
Refer to section 10.4 in the MAN-G-Board Level Modules Hardware Manual for further details
of the Port B connections.
10.3.2.1.
Incremental Encoder
Figure 30: Port B Incremental Encoder Input – Recommended Connection Diagram
For short distances between the drive and control, 0.5 to 1.0 m wires can be used and shielding
is not required.
For longer distances than 1.0 m and/or high EMI environment, shielded and
twisted wires should be used. Drain wires should be connected to Elmo COMRET.
