Gold Twitter Installation Guide
MAN-G-TWI (Ver. 2.000)
|Feedback Connector FDB|
www.elmomc.com
51
Table of Contents
Figure 28: Absolute Serial Encoder – Recommended Connection Diagram for Sensors Supporting
Data Line Only (NRZ types, e.g., Panasonic / Mitutoyo / etc.)
For short distances between the drive and control, 0.5 to 1.0 m wires can be used and shielding
is not required.
For longer distances than 1.0 m and/or high EMI environment, shielded and
twisted wires should be used. Drain wires should be connected to Elmo COMRET.