![Elmo 1/100 Installation Manual Download Page 15](http://html1.mh-extra.com/html/elmo/1-100/1-100_installation-manual_2394809015.webp)
Gold Twitter Installation Guide
MAN-G-TWI (Ver. 2.000
|CE Declaration|
www.elmomc.com
15
Table of Contents
Chapter 5:
Standards
Refer to the complete Standards list detailed and available on the internet at:
https://www.elmomc.com/capabilities/standards-compliance/gold-family/
5.1.
CE Declaration
Refer to the complete EC Declaration of Conformity available on the internet at:
https://www.elmomc.com/wp-content/uploads/dlm_uploads/2018/05/Gold-Line-CE-Declaration-
of-Conformity.pdf
.
Chapter 6:
Unpacking the Drive Components
Before you begin working with the Gold Twitter, verify that you have all of its components, as
follows:
•
The Gold Twitter servo drive
•
The Elmo Application Studio (EASII) software and software manual
The Gold Twitter is shipped in a cardboard box with Styrofoam protection.
To unpack the Gold Twitter:
1.
Carefully remove the servo drive from the box and the Styrofoam.
2.
Check the drive to ensure that there is no visible damage to the instrument. If any damage
has occurred, report it immediately to the carrier that delivered your drive.
3.
To ensure that the Gold Twitter you have unpacked is the appropriate type for your
requirements, locate the part number sticker on the side of the Gold Twitter. It looks like
this:
4.
Verify that the Gold Twitter type is the one that you ordered, and ensure that the voltage
meets your specific requirements.
The part number at the top provides the type designation. Refer to the appropriate part
number in the section Catalog Number at the beginning of the installation guide.