ELMETRON CX-401, User Manual

Page: 94 / 120

- 88 -
User‘s manual for CX-401 multifunction meter v6.0x
26.2. Entering the reference potential value
After choosing the mode of displaying the relative potential reading enter the
reference potential value. To enter:
-
in the redox potential measuring mode press the button until in the
upper row the (reference potential) symbol will be displayed (Pic.
45.);
-
with the , buttons enter the reference potential value or press
the button, the meter will substitute the value which was measured at
the moment of pressing the button;
-
return to the measuring mode by pressing the button.
Pic. 45.
If the relative measurement has not been chosen (section 26.1), the
reference potential screen will not appear.
Note: pressing the , buttons simultaneously sets the reference
potential value to 0.0 mV.