ELMETRON CX-401, User Manual

Page: 60 / 120

- 54 -
User‘s manual for CX-401 multifunction meter v6.0x
15.2.4. Readout of the K constant
When calibration in standards is finished, it is possible to check the K
constant in each of the calibration points.
To do so:
-
in the conductivity measuring mode press the button until the cell
number displays ( , , ). In the place of the K constant value the
lines will be displayed. Between the upper and the lower line the points
are shown, in which the cell was calibrated. If the K constant value
appears below the cell number, it informs that it has been entered
manually (without using standards);
- pressing shortly the button enables checking the calibration date
(Pic. 32A), then the calibration point value (at the top of the LCD) and the
K constant value (at the bottom of the LCD) for all the calibration points
(Pic. 32B);
-
return to the cell number choosing mode pressing the button or
enter the measuring mode by pressing the button.
A B
Pic. 32