ELMETRON CX-401, User Manual

Page: 106 / 120

- 100 -
User‘s manual for CX-401 multifunction meter v6.0x
30.2. Recording single readings
If recording single readings has been chosen according to the previous
section, every press of the button records a reading. The newest
reading is recorded under the number after the last one. In case of checking
the readings stored earlier and not returning to the last one, the readings will
not be deleted and the value will be stored under the first empty position. In
case of storing the reading beginning with the chosen number, first delete the
readings starting from this particular number (as described in the section
30.5), and start collecting readings by pressing the button.
While recording a reading, its number will be displayed for a moment.
If after pressing the button instead of a number the symbol is
displayed, it informs that the maximal number of readings has been reached.
30.3. Collecting measuring series
There is a possibility to store series of measurements in the meter’s memory.
It is necessary to:
- choose the way of collecting the results serially (point 30.1.a);
- enter the time interval (point 30.1.b);
- delete stored readings starting from the chosen one (section 30.5);
- return to the measuring mode by pressing the
button;
- with the
button choose the function which readings are going to be
stored;
- with the button start collecting series. The measurements will be
stored starting from the first free number.
Collecting series is signalised by blinking frame around the symbol of
function of which results are being stored.
Each time the reading is recorded, its number displayed for a moment.
Collecting series may be stopped by pressing the or the button or
by filling up the memory. If the series is not filling the memory totally,
collecting the next series may be started until the end of the memory
capacity.