ELMETRON CX-401, User Manual

Page: 82 / 120

- 76 -
User‘s manual for CX-401 multifunction meter v6.0x
22.1. Readout of the sensor parameters after calibration
When the pH electrode has been calibrated, it is possible to check its
parameters: mV potential in the calibration points.
To check, in the oxygen measuring mode:
-
press the
button until the sensor number shows at the upper part of
the display ( , or symbol);
- with the , buttons choose the number of the electrode that is to
be checked and press the
button shortly. The last calibration date will
be displayed in the following format: month – day – year (below), Pic. 41A.
Between the upper and the lower row the points in which the sensor is
calibrated are displayed;
- press the
button again, the reading in the P1 point will be visible in
the upper row of the display;
-
press the
button once again, the reading in the P2 point will be visible
in the upper row of the display (Pic. 41B);
A B
Pic. 41
Return to the electrode number readout by pressing the
button, and to
the measuring mode by pressing the button.