ELMETRON CX-401, User Manual, Page: 48 / 120

- 42 -
User‘s manual for CX-401 multifunction meter v6.0x
13. ENTERING THE CONDUCTIVITY MEASUREMENT PARAMETERS
Before starting calibration and measurements it is necessary to perform all
activities described in the chapter 6. Additionally, according to the chapter
below, it is necessary to choose the unit in which the calibration and
measurement are going to be made.
13.1. Choosing the unit
The result of the measurement is displayed in units of conductivity or salinity.
Salinity can be counted to NaCl, KCl or TDS content. The result can be
displayed in % of weight concentration or in g/l. To choose the unit:
- in the conductivity measuring mode press the button till the
(unit) symbol displays in the lower row on the LCD;
- with the , buttons choose in the lower row on the LCD:
- measurement in conductivity units (Pic. 19.);
Pic. 19.
- measurement in resistivity units (Pic. 20);
Pic. 20