MP500/4N-8-16 Installation
19
From the control panel towards the remote user
From the control panel, via outgoing calls, alarms and signals can be sent directly to the PC.
From the remote user towards the control panel
The user or installer, via calls to the control panel, or incoming calls to the control panel with return call, can:
Carry out remote programming.
Carry out remote management for:
o
inquiring about the system status (armed/disarmed, alarms, and anomalies present);
o
visualization of the input status;
o
partition activation and deactivation;
o
isolation and resetting of inputs;
o
enabling and disabling of codes and keys;
o
event log reading.
Notes:
The GSM IMG500/N interface is an optional item and can be used either as an alternative or together with the PSTN ILT500-N
interface.
In the GSM interface it is necessary to use a SIM card enabled for data/incoming fax + voice (the SIM500 was tested with a TIM
SIM)
The PC must have Hi-Connect software installed.
For further information, please see
5.12.8 Connecting the telephone dialler
1.3.3 Connection with a local PC
Figure 4 - Diagram of connection with local PC
With the USB and Web server interface, the same functions illustrated in paragraph
1.3.2 Connection with a remote PC
Notes:
The USB interface is generally used during maintenance to programme the control panel.
For connection via USB, use the IT USB/KEY.
The PC must have Hi-Connect software installed.
N
N
