18
MP500/4N-8-16 Installation
From the remote user towards the control panel
The user, via calls to the control panel, can:
Use remote management with vocal guide and commands in DTMF for:
o
inquiring about the system status (armed/disarmed, alarms, and anomalies present);
o
partition activation and deactivation;
o
isolation and resetting of inputs;
o
output remote controls (for gate opening devices, heating equipment, irrigation, etc.);
o
environment listening (through optional vocal keypads);
o
environment speaking (through optional vocal keypads);
Remote management with SMS for output remote controls (for gate opening devices, heating equipment, irrigation, etc.);
“Zero cost” remote management through the Caller ID for output remote controls (gate opening devices, typically).
Notes
:
The GSM IMG500/N interface is an optional item and can be used either as an alternative or together with the PSTN ILT500
interface.
As regards the GSM interface, using a SIM card (either of the pre-paid or the subscriber type) is sufficient; to avail of the signalling
for running out of credit, it is necessary to ascertain this service with the respective mobile phone carrier.
For further information, please see
5.12.8 Connecting the telephone dialler
1.3.2 Connection with a remote PC
Figure 3 - Diagram of connection with remote PC
N
N
