Elk ELK-M1EZ8 Installation Manual Download Page 35

Page: 35 / 68

M1EZ8 Installation and Programming

Page 35

[Effective w/Firmware 4.3.6]

Menu 07 - Global System Definitions

(continued)

This option sets the control to transmit automation task status changes immediately as
they occur.

This option sets the control to transmit automation lighting status changes immediately
as they occur.

Sets the control to transmit keypad key changes. This includes the Chime, Bypass, Exit,
Stay keys, the ELK key and it’s surrounding arrow keys, and the F keys. It does not
transmit any of the numeric keys..

Allows User Menus 1 through 5 to be blocked from view until a valid User code is entered.
If set to “Yes”, only User Codes which have the “Menu 1-5 Allowed” option enabled will be
able to view or access Menus 1 through 5. Default is No.

This is the 6 digit Installer program code that is required in order to access the local
installer programming mode.

NOTE: Be careful when changing this code as it will be

impossible to program the panel if the code is programmed wrong or forgotten.

This is a read-only location. Each control is assigned a unique serial number for
identification of the unit regarding warranty, technical support, anti-takeover, and other
issues that may arise.

This is a read-only location displaying information about the current software and
bootloader revision that the control is operating with. This will only be needed with the
assistance of a factory technical support person.

This option allows factory default values to be restored by individual menus/categories.
Press the right arrow to select this option, then press the up or down arrow keys to scroll
through the choices. To factory default any single category enter the displayed number.
For example, entering 81 from this screen will cause all the User Codes to be factory
defaulted. Please be patient as it may take a minute or more to default some items.

Entering 82 from this screen causes all area definitions to be factory defaulted.

Entering 83 from this screen causes all keypad definitions to be factory defaulted.

Entering 84 from this screen causes all zone definitions to be factory defaulted.

Entering 85 from this screen causes all zone names to be factory defaulted.

Entering 86 from this screen causes all the cutoff timers to be factory defaulted.

Entering 87 from this screen causes all global system defs to be factory defaulted.

Entering 88 from this screen causes all telephone reporting setup to be factory defaulted.

Entering 89 from this screen causes all telephone numbers ONLY to be factory defaulted.

Entering 90 from this screen causes all area report codes to be factory defaulted.

Entering 91 from this screen causes all zone report codes to be factory defaulted.

Entering 92 from this screen causes all system report codes to be factory defaulted.

Entering 93 from this screen causes all user report codes to be factory defaulted.

Entering 95 from this screen causes all wireless definitions to be factory defaulted.

Entering 99 from this screen causes the entire panel programming to be factory defaulted.

Global Sys Def

Description of Option

12345678901234567890123456789012123

G44:xxxxxxxxxxxx
Axxxxxx Bxxxxxx

12345678901234567890123456789012123

G45:=DefaultCtl

81=User Codes

12345678901234567890123456789012123

G42:=172839

Local Prog Code

82=Areas Data
83=Keypads Data
84=Zones Data
85=Zone Names
86=CutoffTimes
87=Global Data
88=TeleAcct Data
89=Tele #’s Only
90=AreaRptCodes
91=ZoneRptCodes
92=SysRptCodes
93=UserRptCodes
95=WirelessDef
99=Entire Panel

12345678901234567890123456789012123