Elk ELK-M1EZ8 Installation Manual Download Page 31

Page: 31 / 68

M1EZ8 Installation and Programming

Page 31

[Effective w/Firmware 4.3.6]

12345678901234567890123456789012123

CT01:=00600 sec

BurgDuration

12345678901234567890123456789012123

CT02:=00000 sec

FireDuration

Menu 06 - Alarm Duration Timers

12345678901234567890123456789012123

06-Alarm Cutoff

Timers

Alarm Cutoff Timers

Description of Option

Burglar Alarm duration time in seconds. Default time is 00600 sec. (10 min.). Burglar
always activates Siren/Voice Output (Out1) and Siren Output (Out2). Additional outputs
may be programmed using the RP software “Rules” function.

Fire Alarm duration time in seconds. Default time is 65535 sec. (never cutoff). Fire always
activates Siren/Voice Output (Out1) and Siren Output (Out2). Additional outputs may be
programmed using the RP software “Rules” function.

Medical Alarm duration time in seconds. Default time is 00600 sec. (10 min.). Medical
always activates Siren/Voice Output (Out1) and Siren Output (Out2). Additional outputs
may be programmed using the RP software “Rules” function.

Audible Police Alarm duration time in seconds. Default time is 00600 sec. (10 min).
Audible Police always activates Siren/Voice Output (Out1) and Siren Output (Out2).
Additional outputs may be programmed using the RP software “Rules” function.

CO (Carbon Monoxide) Alarm duration time in seconds. The default time is 00600 sec. (10
min.). This alarm type is not preassigned to any outputs. The RP software “Rules”
function must be used to assign outputs.

Emergency Alarm duration time in seconds. The default time is 00600 sec. (10 min.).
This alarm type is not preassigned to any outputs. The RP software “Rules” function must
be used to assign outputs.

Freeze Alarm duration time in seconds. The default time is 00600 sec. (10 min.). This
alarm type is not preassigned to any outputs. The RP software “Rules” function must be
used to assign outputs.

Gas Alarm duration time in seconds. The default time is 00600 sec. (10 min.). This alarm
type is not preassigned to any outputs. The RP software “Rules” function must be used
to assign outputs.

Heat Alarm duration time in seconds. The default time is 00600 sec. (10 min.). This alarm
type is not preassigned to any outputs. The RP software “Rules” function must be used
to assign outputs.

Water Alarm duration time in seconds. The default time is 00600 sec. (10 min.). This
alarm type is not preassigned to any outputs. The RP software “Rules” function must be
used to assign outputs.

Aux 1 Alarm duration time in seconds. The default time is 00600 sec. (10 min.). This
alarm type is not preassigned to any outputs. The RP software “Rules” function must be
used to assign outputs.

Aux 2 Alarm duration time in seconds. The default time is 00600 sec. (10 min.). This
alarm type is not preassigned to any outputs. The RP software “Rules” function must be
used to assign outputs.

12345678901234567890123456789012123

CT03:=00600 sec

Med Duration

12345678901234567890123456789012123

CT04:=00600 sec

Pol Duration

Each alarm type has a duration timer for cutting off the alarm after a programmable time period. Any output assigned to
the alarm type will turn on when the alarm activates and will turn off when the alarm cutoff timer expires. If multiple alarm
types are assigned to a single output, all alarms must turn off before the output can turn off. The range in seconds is
00000 to 65535. 00000=Never turn on. 65535=Never turn off NOTE: 65535 seconds is 1,092 minutes or 18.2 hours.

12345678901234567890123456789012123

CT05:=00600 sec

CO Duration

12345678901234567890123456789012123

CT06:=00600 sec

EmerDuration

12345678901234567890123456789012123

CT07:=00600 sec

FrezDuration

12345678901234567890123456789012123

CT08:=00600 sec

Gas Duration

12345678901234567890123456789012123

CT09:=00600 sec

HeatDuration

12345678901234567890123456789012123

CT10:=00600 sec

WatrDuration

Press RIGHT arrow key to select this menu. Press UP or DOWN arrow keys to select
another menu. The ELK key backs up one menu level. To exit press the * or Exit key.

12345678901234567890123456789012123