Elk ELK-M1EZ8 Installation Manual Download Page 30

Page: 30 / 68

M1EZ8 Installation and Programming

Page 30

[Effective w/Firmware 4.3.6]

123456789012345678901234567890121234

ZN001 13: =No

In CrossZonePool

Menu 05 - Zone Definitions

(continued)

Zone Definitions

Description of Option

Dialer delay is designed to reduce false alarm dispatches. Upon an alarm from a zone
with this option the communicator delays dialing for the “Dialer Delay” time programmed in
Menu 09-Area Reporting Codes. If a valid code is entered before this delay expires, the
report will ABORT (no report). If an ‘Alarm Abort” code is programmed, (see Menu 09), the
communicator will transmit this in place of the alarm. NOTE: The Dialer Delay Time will
only start once per alarm, regardless of additional zone trips. Default setting is No.

Allows zone to trigger a listen-in session after alarm is reported. Control will hold the line
for 60 seconds after ‘kiss-off’, allowing Central Station to enter *55* to activate listen-in.
The Central Station can renew or terminate listen-in remotely. NOTE: Two-Way must be
enabled (Menu 07-Globals) and an interface (ELK-M1TWI) with one or more microphone/
speakers (ELK-M1TWS) must be installed. Default setting is No.

A Yes allows zone to be manually bypassed. A bypassed zone will be ignored by the
system. Burglar zone bypasses are canceled upon a disarm. To bypass a zone: Press
the Bypass key + [zone number] + the Bypass key once again. Default setting is Yes.

Force Arm allows a violated zone to be temporarily bypassed upon arming. Prior to arm,
the READY light blinks if force arm zone(s) are the only zones violated. Force arm
requires two entries of a user code. Quick arm cannot be used for force arming. Upon
the first code entry the keypad will display READY FORCE. The second code entry will
force arm. Force armed zone(s) automatically return to service if they become normal
while armed.

CAUTION! Force arm operates in a unique way on entry/exit zones! -

Entry/Exit zones that are also force armable can be violated during the exit delay and still
become force armed. This allows a user to arm, open a garage door, back out, and then
shut the door at their leisure, without creating a false alarm and without a long exit delay
time. As soon as the garage door is closed, it will automatically return to service. Default
setting is No.

NOTE: For UL installations Force Arm shall be disabled.

Swinger Shutdown prevents a runaway communicator by shunting a zone after two trips.
It cannot send another alarm until the control is reset OR a 48 hour time period elapse.
Default setting is No.

NOTE: For UL installations this feature shall be disabled.

This type zone must be tripped at least once per disarm cycle*. This prevents blocked
PIRs or seldom used doors from being left not secure. Keypad will display “Not Ready” if
a periodic zone has not been tripped. * NOTE: A periodic trip will not be required for a
disarm period of 1 hour or less. Default setting is No.

Response is the time the zone must be violated before the system detects it. If No, the
zone responds to the Slow response time. The time values are in milliseconds and they
are programmed in the Menu 07 Global Sys. Definitions menu. Default setting is No.

Each zone may be selected to be included in the Chime annunciation whenever Chime
Mode is turned on from the keypad. Most zone types may be included via this option.
Default setting is No.

Burglar zones programmed “In CrossZonePool” cannot cause an alarm unless another
zone in the cross zone pool also activates within a time window OR unless “Cross Zone
Self Ver“ is Menu 07 - Global System Definitions.

Entry/exit zones should NOT be

programmed as Cross zones.

Default setting is No.

To program the text description of the Zone (Name) press the left arrow key. Enter text
using the number keys. I.E. For a “K” press the 5 key twice. To move the cursor press
the right or left arrow keys. While programming the text, pressing the Chime key inserts
a space and the Bypass key erases 1 digit. The up and down arrow keys move between
upper and lower case. Press the ELK key when complete.

123456789012345678901234567890121234

ZN001 14:Name

Zone 001

123456789012345678901234567890121234

ZN001 07: =No

Zone Bypassable

123456789012345678901234567890121234

ZN001 10: =No

Req PeriodicTrip

123456789012345678901234567890121234