elem 5411074077785 Manual Download Page 11

 11

Take hold of the pistol grip and move the 

lance evenly along the surface to be cleaned.

 

Direct the nozzle as required in order to 

achieve optimal cleaning results. 

Determining the correct distance for the water 

jet is a matter of experience. 

Close the tap of the water mains after having 

switched off the machine. 

Hold the trigger of the pistol grip until the 

pressure is off the system. 

Lock the trigger using the safety catch. 

 
Never let the machine run idle for more than 2 
minutes. Within that period the temperature of 
the water in the system can become so high 
that the pump will be damaged beyond repair. 
 

Switching on and off (fig. A) 

To switch the machine on, set the on/off 

switch (1) to ‘I’. 

To switch the machine off, set the on/off 

switch (1) to ‘0’. 
 

CLEANING AND MAINTENANCE 

The machine does not require any special 
maintenance. 

Regularly clean the ventilation slots. 

If the machine is not used for a longer period 

of time (3 months or more) or if it is stored in an 
unheated area, then let the motor before 
storage suck some antifreeze to prevent the 
risk of freezing and oxidation. 
 

Cleaning the inlet filter (fig. E) 

Before use always check the inlet filter (12) and 
clean it if necessary. 

Use your fingers to remove the filter from the 

connection (9). Beware not to damage the filter. 

Use your fingers to re-install the filter. 

Check whether the filter has been placed into 

the connection correctly. 
 

Cleaning the nozzle   

During use, if the water jet decreases or stops, 
the nozzle needs to be cleaned. 

Make sure that the machine is switched off 

and that the tap of the water mains has been 
closed. 

Take hold of a thin pointed object (for example 

a needle) and prick the opening in the nozzle. 
 
 

TECHNICAL DATA 

Mains 

voltage 

    230 

Mains 

frequency 

Hz 

 

   50 

Power 

input 

 

    1,400 

Max. operating pressure bar     

100 

Water consumption l/min    

 

5.5 

Max. water temperature °C   

 

5-60 

Weight 

kg 

     5.8 

 

ENVIRONMENT 

Should your machine need replacement after 
extended use, do not put it in the domestic 
waste but dispose of it in an environmentally 
safe way.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Summary of Contents for 5411074077785



























Reviews: