1. GENERAL DESCRIPTION
ThruScan
s3/s9/sX/sX-i/sX-WP
WTMD’s all are simple to operate and with advanced
microprocessor controlled, digital pulse induction utilizing VLF Technology that provide superior
metal discrimination and detection. It is a versatile and easily portable walk-through metal
detection unit providing a high level of detection with a walk-thru rate of up to 60 persons per
minute.
(* for
ThruScan
s3 aprx. 30 persons/min)
ThruScan
s9/sX/sX-i/sX-WP
has an enlarged stable and homogeneous detection field that
comprises of several horizontal and vertical zones, which can detect metal objects within 9 separate
scanning zones of the WTMD
(
*for
ThruScan
s3
three zones
).
Detection field homogeneity is
improved all through the passage dramatically by revealing the exact locations that are threat. The
operator need only to search the
ThruScan
’s
s9/sX/sX-i/sX-WP
indicated by the side panel lights.
See Section 3.4
A bright, highly visible LED (Light Emitting Diode) VU display provides a visual indication of the level
of metals detected within the field of detection. Operator may also approximate the magnitude of
the metal by warning sound without looking the
ThruScan
’s
VU-meter on the Control Panel.
Traffic LED’s (Green or Red) on the side panels (ENTER SIDE) show if WTMD is ready for passage.
If the lights show green the gateway may be entered, if the lights show red the person must not
enter. See Section 3.3
(*for
ThruScan
s3 traffic lights are under Control Panel at gateway)
Zone lights show the location of the metal object whether it is on the left, right, top, bottom or at
the centre of the body and are located on the side panels of the exit side of the gateway. Zone
lights originate from LED arrays of 2x6 to show 9 zones. These zones are being indicated on the
control panel also by “Graphic Zone Leds (Locator)”.
(*for s3, display only at control panel)
A backlited LCD Display (monitor), (See Program MENU Section 3.1.1) is located on the overhead
Control Unit and display operational information, including program, alarm and sensitivity settings
as well as a traffic count of both in-coming and out-going passing’s.
A see through cover with mechanical lock
(* optional for
ThruScan
s3)
enable to access to
Control Unit in order to prevent unauthorized tampering. Calibration and control settings are
further protected by a Programmable 4 digit
PIN CODE
. See Section 6.8
ThruScan
(s9/sX/sX-i/sX-WP)
also incorporates an integral UPS battery back up
(*optional for
ThruScan
s3)
supply mains to protect the mains from power fluctuations and to maintain
operation for up to 4 hours (longer times optional) in case of mains failure. The WTMD
automatically shuts itself down in case of the lack of the necessary voltage.
Another unique feature of the
ThruScan
sX/sX-i/sX-WP
is its ability to monitor up to 99 separate
(* for
ThruScan
s3/s9 sixteen WTMDs for 1 PC)
ThruScan
units remotely from a PC or
even remotely from anywhere in the world via a standard and satellite(thuraya) telephone lines
under a modem connection. The hardware for this feature is built in as a standard and the SCADA
software and connection cables are available separately as an option. See Section 7.1
Other features of the
ThruScan
include superior sensitivity, stability and noise rejection. All
electronics are built into the overhead Control Unit, connection with the panels provided with
sockets, eliminating the problems often associated with a cable-connected console.
8
