10.2.2
ThruScan
sX/sX-i/sX-WP
SRC-SCADA Remote Control P rogra m
ontrol
hone.
1.2-
odem should be
1.3-
Dial
”. There is no difference between local (in house), domestic or
in
r for each walk-thru from 1 to 99.
ThruScans
, you should disconnect the other Magnetic Walk-Thru
uScan
has to be connected to the network)
tion. (Select right COM port)
u want to assign to that walk-thru to “
OUT COUNT
” window,
with the other Magnetic Walk-Thru Metal Detectors under communication to assign
1.5-
1.6-
etal
signments performed at “Sensitivity Select” are for ALL ZONES !
bu
Use r Ma nua l
Please enter your Registration Code for the activation of your SRC-SCADA Remote C
Programmer. You can have your Registration Code from your dealer by e-mail or telep
1.1
- Language
- Select your language from “Setting” window.(English, German, Spanish, Turkish)
Connection –
To work with a metal detector you need to connect it to a serial port via the cable. To make the
program, please make sure what port you are using, select the "Com Port" and choose COM1 to COM4.
If the
communication is performed by Telephone Lines then the com-port of the m
selected visually.
You can check several ports simultaneously for the right communication.
If the communication would be done by telephone lines; then the phone number should be entered to “
sX
Phone Number
” window and pressed “
ternational communications.
1.4-
Selection Of GATE NO
- You have to give index numbe
(Note:
All
ThruScan
s number-1 at the factory out-put)
(Note: When you communicate with selected
Metal Detectors from your network ! )
To change the
ThruScan
s index number: (Only one
Thr
a) Arrange the communica
b) Press “
STOP
” button,
c) Write
“NEW”
(Caps Letters!) to “
IN COUNT
” window,
d) Write the index number(1-99) yo
e) Pres to “
IN COUNT
” button,
You can repeat this process
your own index number.
Select the
ThruScan
number from “
GATE NO
” window. This will up-date the complete information on your
SCADA screen at your pc for the data of the selected walk-thru.
“
STATUS
” window will display not only your executions such as, RUN(X), STOP, READ ERROR, IR(INFRARED)
ERROR, LOW BATTERY etc.. i.e. the error codes (Telephone line disconnection displayed as READ ERROR) but also
the walk-thru’ errors are displayed.
In “
Level Select
” window; 20 security levels are existing of which NC (NILECJ) can not be changed. The other 19
can be assigned to the desired sensitivity. Last channel AD (AUTO DESIGNATE) is assigned for the automatic
designation of the metal volume. (Pls. refer to your “Manual” for further information)
imultaneously and send together to your Magnetic Walk-Thru M
You can change several Security Levels s
Detector. P
ote that; The sensitivity as
lease n
To change the Security Level Adjustments:
d) Press “
STOP
” button,
e)
Select the Security Level you want to change its sensitivity,
sensitive)
f)
Set it at a value between 0-245 ( 0- the most sensitive , 245- the less
g)
“
Send
” it or them to your
ThruScan
. (One or more can be send at the same time ! )
Zone Select
1.7- By “
” section window; all zones can be adjusted separately.
1.8-
“
?
” signs for all windows are for “HELP” menu to ease you to use SRC-Scada Remote Control Program.
1.9- “
SEND
” button resets old data and memorize the new assigned data to your
ThruScan
.
1.10- “
Refresh
” button reports the data of your
ThruScan
in every 30 secs to your PC. You could get data instantly
every second by pressing “
Refresh
” button. “Send” is not possible in Refresh Mode.
“
F
1.11-
actory Settings
” button enables to return to default settings. These settings can be re memorized by “
SEND
”
tton. Counter values do not change at this process.
1.12-
Select “Real Time” from the “Options” at the bottom of the SCADA screen in order to observe the detection,
.14-
RC-SCADA Remote Control Programmer. This will shut down the
communication/telephone line also.
e the rights and disclaims all warranties as to this software, whether express or implied, including without limitation any implied warranties of
lity or fitness for a particular purpose. Use under your own responsibility, but comments (even critique) in English, German (or in Turkish) are welcome.
counting, audible, visible alerts instantly.
Select from “Options”(1 to 5) to set the alarms duration on the screen.
1.13-
Select “Data Registration” from “Options” to register the history of incoming/outgoing and alarmed counter
values at an automatically opened file.
“
X
” button is to exit from your S
1
The author reserv
merchantabi
46
