CAUTION! Misuse of this equipment specified by the manufacturer may
result in damage to property or injury to persons.
Technical Specifications:
Electrical
: Select 110VAC or 220VAC by the Switching Supply Module by opening the
cover of the control unit.(Factory default 220 VAC)
70 – 270 VAC (Supply should be earthed & stable)
10 Watts standby, 20 Watts max in alarm. A-Class Energy Save
Frequency: 50/60 Hz
Maximum Relative Humidity : 95% non-condensing
Operating Temperature
: -20° ~ +70º C
WARNING:
All of the
ThruScan
s and the PC of the SRC-SCADA Remote Control, must be powered at
the same point for the same "ground/earth". Otherwise problems may occur due to
potential difference.
Standards:
The units conform to NILECJ L/1-3 standards
ThruScan
is within the magnetic emission limits approved by FDA (American Food & Drug
Administration). It has been certified by experts that has no effects on the peacemakers, the
pregnant women and as well at magnetic media. A “report of expertise” on this issue is presented
in Attachment-1. See Section 10.1.
Protect your
ThruScan
from direct rain, mist and/or condensation and place water level on a
stable floor without vibration.
DO NOT place the
ThruScan
close to telephone lines, television monitors, electric motors,
transformers, power cables, or control circuits; excessive electrical noise may cause false
measurements.
CAUTION!
ThruScan
must be firmly anchored to the floor to reduce the accidental risk
of fall down and thus injure persons or cause property damage.
Do not drive nails, screws or drill holes into the side panels.
Screen only when the green “ready LED” is on to ensure proper operation.
Test your apparatus daily especially against environmental displacements.
NOTE:
Security metal detectors are designed to use within a total security-screening
plan. It is the last user’s responsibility to define the overall plan and ensure that
it operates effectively.
7
