2 INSTALLATION
2.1 SITE SELECTION
Before choosing a site for
ThruScan
, it is important to consider the volume and throughput of
pedestrian traffic, space availability and overall environmental conditions.
Position and fix
ThruScan
on a flat, stable floor where it remains unaffected by the sun, rain, mist
or condensation. If WTMD will be used for a short time in outdoor then use “Rain Protect Shelter
(Hat)” as well as outdoor package.
(See Section 7.2). ThruScan sX-WP is produced for outdoor
fulfilling IP55 standards.
To avoid external metal interference, ensure that there are no large metal items near
ThruScan
.
False alarms may be caused nearby the moving metallic such as an escalator or a revolving door as
well as due to an electrical interference from radio, telephones, television monitors, powerful
electronic motors and transformers.
Do the electrical installation of the WTMD preferably from the ceiling or from the floor (without
moving or stepping on it).
Protect your WTMD from humidity and water since it is versatile electronic equipment.
There is a very sensitive magnetic zone in the passing section of the WTMD. This magnetic zone
can easily be affected by shaking. Protect your
ThruScan
from such unstable situations.
2.2
ASSEMBLING & MOUNTING
2.2.1 Verify that the following contents are included:
9
Left hand side panel
9
Right hand side panel
9
Main control & display unit
9
Back fixing crosspiece
9
Mains power lead
9
Synchronization connection cable
9
6 base fixing screws
9
8 panel fixing bolts
9
8 finishing bolt covers
9
Installation spanner (for panel fixing bolts)
Main Control & Display
Unit
Right
Side
Panel
Back fixing
crosspiece
Left
Side
Panel
9
Allen key (for base plate)
9
User’s manual
2.2.2 Arrange the major components as shown.
2.2.3 Lay the main Control Unit
(with the control panel facing down)
onto a soft, scratch free
surface
(the packing (bubbled pe) is ideal)
.
14
