Electronics Line infinite prime, Installation Manual

Page: 85 / 113

-85-
12.4: Clear Wireless Transmitters
The Clear Wireless Transmitters function enables you to delete all registered transmitters
at once.
To clear the transmitter register:
1. From the Programming menu, select Initialize, Clear Wireless [974];
the system prompts you for confirmation.
2. Press to confirm; the transmitter register is cleared.
12.5: Find Modules
The Find Modules function runs a diagnostic test that identifies the modules and keypads
that are connected to the system bus. With this information, the system knows which
add-on modules should be present, enabling supervision for those modules.
To run the Find Modules test:
1. From the Programming menu, select Initialize, find Modules [975]; the
system prompts you for confirmation.
2. Press to confirm; the system begins to search for the connected
modules. At the end of the search, the modules that are present are
displayed and the system asks if you want to save the displayed list.
3. Press ; the list is saved.
,
If a connected module is not included in the list, check the wiring connections and run this
test again.