manualshive.com logo in svg

Electronics Line infinite prime, Installation Manual, Page: 55 / 113

Share
Download
Electronics Line infinite prime Installation Manual Download Page 55

-55- 

To program tones sounded by the built-in siren on arming: 

1.  From the Programming menu, select Tones, Arm Tones, Siren [9332]. 
2.  Select Enabled or Disabled. 

8.6.4: Disarming Tones 

To program tones sounded by the wireless siren on disarming: 

3.  From the Programming menu, select Tones, Disarm Tones, WL Siren [9341]. 
1.  Select Enabled or Disabled. 

To program tones sounded by the built-in siren on disarming: 

1.  From the Programming menu, select Tones, Disarm Tones, Siren [9342]. 
2.  Select Enabled or Disabled. 

8.7: Home Automation Tones  

Home Automation tones are sounded when you control HA units using keypads or 
keyfob transmitters.  

To program built-in siren Home Automation tones: 

1.  From the Programming menu, select Tones, HA Tones [935]. 
2.  Select Enabled or Disabled. 

8.8: System Trouble Tones 

System trouble tones are sounded to provide an audible indication that a system trouble 
condition exists. On hearing these tones the user is then able to determine which trouble 
condition is present from the LCD keypad on the front panel. For additional information, 

see 3.4.2: System Trouble Tones

. 

8.8.1: Trouble Tones 

The Trouble Tones option allows you to enable or disable audible trouble annunciation.   

To program the Trouble Tones option: 

1.  From the Programming menu, select Tones, Trouble Tones [936]. 
2.  Select Enabled or Disabled. 

8.8.2: Telephone Trouble Tones 

Most trouble tones are not sounded between 10:00pm and 7:00am so as not to disturb 
the user late at night. Telephone trouble, however, may be an attempt to sabotage the 
system by cutting the telephone wires. For this reason, you can program telephone 
trouble tones to sound at all times. 

To program the Telephone Trouble Tones option: 

1.  From the Programming menu, select Tones, Tel. Trb. Tones [937]. 
2.  Select Immediate or Delayed. 

8.8.3: Fire Trouble Tones 

The Fire Trouble Tones option is a feature designed to repeat fire-related trouble tones 
until the problem has been taken care of. If this feature is enabled, fire trouble tones shall 
be repeated 3½ hours after the user has manually silenced the tones if the trouble 
condition has not been restored. 

 

Summary of Contents for infinite prime


















































































































Reviews:

No comments