Electronics Line infinite prime, Installation Manual

Page: 53 / 113

-53-
Chapter Eight: Entry/Exit Timers and System Tones
This chapter explains how to program the time of the Entry/Exit delays and the tones
sounded by the built-in siren and wireless siren during Exit/Entry delays, arming,
disarming, home automation operation and when a trouble condition is present.
8.1: Entry/Exit Delay
The Entry/Exit delay timers determine the amount of time the user has to arm or disarm the
system before an alarm is activated.
You can program separate Entry and Exit delays for each arming method.
To program Exit delay timers:
1. From the Programming menu, select Entry/Exit, Exit Delays [921].
2. Select the Exit delay you want to program: Full [#1], Part [#2] or
Perimeter [#3].
3. Enter a delay time (000-255 seconds).
4. Press
when the desired setting is displayed.
To program Entry delay timers:
1. From the Programming menu, select Entry/Exit, Entry Delays [922].
2. Select the Entry delay you want to program: Full [#1], Part [#2] or
Perimeter [#3].
3. Enter a delay time (000-255 seconds).
4. Press
when the desired setting is displayed.
8.2: Arm on Exit
The Arm on Exit feature cancels the unnecessary remainder of the Exit delay that
continues to count down after the user has vacated the premises. This feature
automatically arms the system when an Entry/Exit zone is closed during the Exit delay.
To program the Arm on Exit option:
1. From the Programming menu, select Entry/Exit, Arm On Exit [923].
2. Select Enabled or Disabled.
8.3: Supplementary Entry Delay
The Supplementary Entry Delay is a pre-alarm feature that is employed in the event that
the system is not disarmed during the entry delay. When the entry delay expires, the
control system’s built-in siren is sounded during an additional entry delay period. At the
end of the supplementary entry delay, the system generates a full alarm condition; the
wireless siren is sounded and an alarm event is reported to the central station.
To program the Supplementary Entry Delay setting:
1. From the Programming menu, select Entry/Exit, Supp. Ent. Delay [924].
2. Select Enabled or Disabled.